Results 1 to 4 of 4

Thread: WTS: Tungsten bolts for the SWD M-11/9

  1. #1

    Exclamation WTS: Tungsten bolts for the SWD M-11/9

    The major drawback of the SWD M-11/9 has always been it's very high rate of fire. It's little more than a bullet hose in OEM form. Over the years, various methods have been employed to reduce the ROF. These have ranged from dismal to very good. Unfortunately, rate of fire reduction has come at the expense of overall size... until now.

    The CF-W bolts are manufactured from Tungsten Heavy Alloy. While very close to the density of pure tungsten, heavy alloys provide a unique combination of corrosion resistance, density, mechanical strength, machinability, and economy. This increases the bolt's original weight of 15.88 ounces up to 32 ounces, and reduces the ROF by over half. As seen in this customer's video, singles are now possible while retaining the original compact size.

    The reviews of the first run of 100 have been very positive and they sold out quickly.

    All bolts are delivered pre-assembled and ready to drop into your OEM upper or side cocker. For ease of recoil spring removal, the "paper clip mod" has been made to your spring guide rod. This modification allows for the fast, easy change of the recoil spring or to quickly clip additional coils to adjust ROF as desired. No tiny roll pins to deal with! Your CF-W bolt ships with 12 spring coils clipped, and we reccomend a maximum of fifteen total removed. This brings your rate of fire down to 620-640 RPM depending on the type of ammo used.

    Cost for a completely assembled CF-W bolt is $750.00 which now includes $4.99 USPS Priority Mail shipping! Your package is insured for the full value, so an adult signature is required at the time of delivery. Credit cards are cheerfully accepted, but their use will add a 3.5% up charge.

    To order, please call 1-702-763-1269 from 9:00AM to 6:00PM Pacific Time, Monday through Saturday. For additional information please email Sorry, no Nevada sales at this time. All NFA rules and regulations apply, and we do not ship to restricted states. Please don't ask!

    *Extra polyurethane buffers are available for $4.50 each.
    *I'd strongly suggest the purchase of an extra ejector rod for $11.00.
    *Recoil spring guide rods are available for $10.00 each.
    *Spare OEM recoil springs $7.50 each. Two OEM recoils springs, $13.25. Clipped on request
    *New sub-600 RPM springs. Two for $20.00 delivered.
    *I have a few NOS original "hockey puck" style cocking knobs available for $15.00 each.
    *Enhanced extractors are $9.50, extractor spring is $4.50.
    *OEM firing pins, $20.00.
    *Firing pin retainers $9.00.
    *Extractor roll pins, two for $2.00.
    *Recoil guide rod roll pins are also two for $2.00.
    *Recoil/back plates $7.50.
    Every part needed for an OEM style or CF-W bolt is available and in stock.

    Trouble shooting guide.

    Go from this...

    ...To this!!!

    *A protype CF-W bolt for the M-11 and M-11A1 .380acp buzz guns is currently being tested. The future is tungsten!

    Last edited by Vegas SMG; 04-18-2017 at 07:37 PM.

  2. #2

    Re: WTS: Tungsten bolts for the SWD M-11/9

    Video of Mr. Greg shooting the CF-W bolt with new ultra low ROF spring at Boulder City RPC.

    Uzi ROF numbers are now available for your SWD M-11/9!
    Addition of the W bolt gives the user the smallest 9mm subgun with the lowest ROF available anywhere in the world.
    Attached Images Attached Images
    Last edited by Vegas SMG; 11-08-2016 at 06:05 AM.

  3. #3

    Re: WTS: Tungsten bolts for the SWD M-11/9

    Testing of the M-11 .380 heavy tungsten alloy bolt continues. Check out the video links!

    Unsuppressed .380 CF-W bolt.

    Suppressed OEM .380 bolt ROF versus suppressed heavy tungsten alloy .380 bolt ROF.
    Attached Images Attached Images
    Last edited by Vegas SMG; 10-09-2017 at 07:34 PM.

  4. #4

    Re: WTS: Tungsten bolts for the SWD M-11/9

    Nice CF-W video review by the VSO Channel.
    Last edited by Vegas SMG; 01-24-2017 at 09:48 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts